您好,欢迎光临中国电子应用网![登录] [免费注册] 返回首页 | | 网站地图 | 反馈 | 收藏
在应用中实践
在实践中成长
  • 应用
  • 专题
  • 产品
  • 新闻
  • 展会
  • 活动
  • 招聘
当前位置:中国电子应用网 > 技术应用 > 正文

Type K Thermocouple Signal Conditioner with ±190V Protection from Accidental Contact and Cold Junction Compensation

2011年05月20日10:40:56 本网站 我要评论(2)字号:T | T | T
关键字:
Type K Thermocouple Signal Conditioner with ±190V Protection from Accidental Contact and Cold Junction Compensation

Thermocouple wires are intended to be electrically floating in order to detect temperature by producing the Seebeck voltage created by two dissimilar metals. This small voltage is amplified to an easily measurable level by an amplifier. To protect the input terminals of the amplifier in the event that the thermocouple is shorted to a high voltage potential, series resistance and clamp diodes can be added.The LTC6078 dual, low offset, low noise operational amplifiers with low power consumption and rail-to-rail input/output swing. Input offset voltage is trimmed to less than 25μV and the CMOS inputs draw less than 50pA of bias current. The low offset drift, excellent CMRR, and high voltage gain make it a good choice for precision signal conditioning. Each amplifier draws only 54μA current on a 3V supply. The micropower, rail-to-rail operation of the LTC6078 is well suited for portable instruments and single supply applications.LT1025 compensates for cold junction over 0°C TO 100°C.

网友评论:已有2条评论 点击查看
登录 (请登录发言,并遵守相关规定)
如果您对新闻频道有任何意见或建议,请到交流平台反馈。【反馈意见】
关于我们 | 联系我们 | 本站动态 | 广告服务 | 欢迎投稿 | 友情链接 | 法律声明
Copyright (c) 2008-2020 01ea.com.All rights reserved.
电子应用网 京ICP备12009123号-1 京公网安备110105003345号